Hardox 400 plate properties and features
Wear plate is steel plate designed for applications where high wear resistance is required. And no wear plate resists every kind of wear and impact better than Hardox. No wonder equipment manufacturers and their customers the world over put their trust in Hardox for applications such as excavators, front wheel loaders, tipper bodies, mining trucks, containers, crushers, fragmentizers, mixers, sieves, demolition tools and barges.
Hardox 400 is an abrasion resistant steel with a nominal hardness of 400HBW. Typical applications are components and structures subject to wear. It is mainly used at the discretion of the purchaser for wear-exposed structures, e.g. excavating, mining and earth-moving machinery, truck dump bodies, conveying, crushing and pulverizing equipment, scrap presses and paving molds. The processing and application techniques as a whole are of fundamental importance for the successful use of the products fabricated of this steel.
Hardox 400 is available in thicknesses of 3 – 130 mm. Hardox 400 is available in widths up to 3350 mm and lengths up to 14630 mm. For widths ≤1600 mm and thicknesses between 3 - 8 mm preferred widths are 1500 or 1600 mm. ANSON supplies Hardox plates 400 is a wear-resistant steel grade. Irrespective of its quality and hardness, weldability and formability of this evaluation is great.
|Grade||C max||Mn max||P max||S max||Si max||Cr max||Ni max||Mo max||B max||V||Other Element|
|Tensile Strength||Yield Strength|
|Grade||Origin||Mpa||Mpa||Elongation in 2 inches (min.)%||Brinell Hardness|
- Through Hardened for Long Wear Life
- Superb Cold Bending & Welding Properties
- High Impact Properties
- Flat Clean, Shot Blasted and Primed Finished Products
ANSON is one of the leading exporter of Hardox 400 steel. It has been tried in amazingly requesting conditions obliging high quality and fabulous scraped abrasion resistance. Hardox 400 is a solidified steel, especially suited for long haul use in grating situations with high surface weight.
Our clients esteem the great cutting, bending and welding properties of Hardox 400 which makes workshop treatment simpler and more effective handling. Hardox 400 is accessible additionally as prepared to-weld parts, which accelerates your generation and makes it simpler than at any other time in recent memory.
- NM400 steel plate
- low alloy steel plate
- Cor-Ten steel plate
- stainless steel plate
- pipeline steel plate
- pressure vessel steel plate
- abrasion resistant steel plate
- shipbuilding steel plate
- steel coil
- carbon steel plate
- Cold rolled steel coil
- quality policy Steel Grades
- EN 10130 cold rolled steel coil specification
- GB/T5213 - 2008 cold rolled coil
- JIS G3141 steel coil specification
- NM500 wear resistant steel
- NM450 wear resistant steel