S235JR steel plate

HOME > blog

S235JR Steel Plate

S235JR (+N) is a non-alloy structural steel. We have large quantities of S235JR in stock with thicknesses up to 200 mm. The minimum thickness is normally 5 mm.

Plates are available up to 3.5m wide and 14m long. Most plates are certified to EN10204 3.2 and normally come from a European mill – typically Tata, Arcelor or Clabecq so you can be assured of good quality in these commodity steel plates. S235JR is equivalent to DIN:ST37-2, JIS:SS400, ASTM:A283C and UNI:FE360B

S235JR Specification:

  • Thickness: 5 – 200 mm
  • Width: Up to 3.5 metres wide
  • Length: Up to 14 metres long
  • Certification: EN10204 3.1/3.2
  • Steel Number:1.0038
  • Delivery Condition: As Rolled or Normalised
Comparison of Steel Grades
S235JR DIN EN 10025-2 Number: 1.0037 EN10025:1990 FE 360 B
DIN17100 ST37-2
NFA 35-501 E24-2
JIS3101 SS400
ASTM A283C
UNI7070 FE 360 B
Chemical Composition % of S235JR Plate
C max Mn max P max S max N max Cu max CEV max
0.2 1.4 0.04 0.04 0.012 0.55 0.38
Mechanical Properties of S235JR Plate
Nominal thickness (mm): to 3 3 – 100 100 – 150 150 – 250
Rm - Tensile strength (MPa) Flat and long products 360-510 360-510 350-500 340-490
Nominal thickness (mm): to 16 16–40 40–63 63–80 80–100 100–150 150–200 200–250
ReH - Minimum yield strength (MPa) Flat and long products 235 225 215 215 215 195 185 175
KV - Impact energy (J) longitud., -20° 0° +20°
27 27 27
Nominal thickness (mm): to 1   1.5 – 2 2 – 2.5 2.5 – 3
A - Min. elongation Lo = 80 mm (%) parallel, 17 18 19 20 21
Nominal thickness (mm): Mar-40 40 – 63 63 – 100 100 – 150 150 – 250
A - Min. elongation Lo = 5,65 √ So (%) parallel, 26 25 24 22 21
Get In touch with
Product Projects Plate Services